The Two Thighs
(Copper Inuit)

1.  With a short loop follow steps 1 to 3 of The Bow Series.

2.  Point 1 downward on the near side of the figure. Combine 1 loops in the following manner: R1 proximally enters the L1 loop (fig. 94a - step A); L1 releases its loop (fig. 94a - step B); L1 proximally enters both R1 loops (fig. 94b). 

3.  1 distally enters 345 loop, picks up 345f, and draws it down through the original 1 loops (fig. 94c - step A). Release 345 loop (fig. 94c - step B). Do not extend the figure.

4.  Rotate 1 toward the center and down and catch the 1 loop in the crook of 1. Pinch 2n between 2 and 3 and lift it upward. Adjust the string tension to form fig. 94c, The Two Thighs. 

Index   Next Figure   Previous Figure

Fig. 94a

Fig. 94b

Fig. 94c

Fig 94d - The Two Thighs