1.  Position 1

2.  Without releasing the loop, rotate the RH a full turn away from you to form a new Position 1 with the strings twisted in the middle of the figure as in fig. 77a.

3.  2 proximally picks up opposite palmar string as in Opening A.

4. Pass 1 distally through 2 loop, then under all remaining strings, and return with 5f on the back of 1 (fig. 77b). Release 2 and 5 loops and extend.

5. Proximally insert 5 into 1 loops (fig. 77c) and spread fingers.

6. Repeat Steps 3 and 4 . There are now four loops on each 1.

7. Distally insert 45 into all 1 loops and hook down all 1f strings, closing 45 to palms (fig. 77d - step A). Allow the distal two 1n strings to slip off; they become 45n (fig. 77d - step B).

8. There are two TV 1n strings. Proximally remove one of these with 2 (fig. 77e - steps A and B) and widely separate 1 and 2 to get fig. 77f, The Squirrel. Rotate 1 and 2 to get the squirrel to repeatedly pop in and out of his hole (fig. 77f and fig. 77g). Each time it pops out imitate the squeak of a ground squirrel.